Antox 75 E Extra

Application method

icon stetec

brush | spray | bath

Treatment time [min.]

icon cas

5 - 60

Coverage rate [1 kg]

icon vydatnost

20 - 25 m²

Amount [kg]




Cleaning solution for alloyed stainless steels and for pickling aluminium.

Compliant with the Kraftwerk Union (KWU) requirements for use in nuclear power engineering.

Scope of application

Removing oxides of contaminant materials and carbon steel deposits from stainless steel surfaces, and evening out the appearance of surfaces.
Pickling weld seams and aluminium surfaces, removing contaminants before and after welding, evening out surface appearance.


Read safety instructions before use. Stir Antox 75 E Extra well. Apply using a brush, spray bottle or spraying device or by dipping. Treatment time is 15–60 minutes for stainless steels, 5–15 minutes for aluminium. Rinse with min. 12 MPa pressure water, or dip a part in water while mechanically cleaning it with a stainless steel or plastic brush or sponge. Keep rinsing until the pickled surface and rinse water are pH neutral.

Waste water disposal

Since rinse waste water is acidic and contains heavy metals, it must be collected. The collected rinse water must be disposed of ecologically. Either use own waste water treatment plant (consult the plant operator) or engage a specialized company to dispose of it.


Antox 75 E Extra contains nitric acid and hydrofluoric acid. The product label contains instructions to be adhered to. Further information is in a safety data list and is available on demand. Persons must wear a face mask with acid vapour filters, protective suit and gloves.

Coverage rate

1 kg of Antox 75 E can treat an area of 20–25 m².


Antox 75 E is shipped in 20 kg packages.

Dangerous if inhaled or swallowed.
Contact causes serious skin and eye burns!



General instructions: Immediately remove clothing contaminated with the product. Do not remove the respirator mask until contaminated clothing is removed.
If inhaled: Transport the person to a place with fresh air. If the person is unconscious, place them into the recovery position, seek medical help.
In the event of skin contact: Immediately wash the affected area with water and soap and rinse thoroughly. Immediately apply Calcium Gluconate 400 solution or gel.
In the event of eye contact: Rinse out the eye with the eyelid open for several minutes using running water, seek medical help.
If swallowed:  Do not induce vomiting, call in a doctor immediately. Drink plenty of water and get fresh air. Call in a doctor immediately.

R 20/21/22 Harmful by inhalation, in contact with skin, and if swallowed

R 34 Causes burns

R 43 May cause sensitisation by skin contact

S 9 Keep container in a well-ventilated place

S 20 When using, do not eat or drink

S 23 Do not inhale spray

S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice

S 36/37/39 Wear suitable protective clothing, gloves and eye/face protection

S 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible)

S 60 This material and its container must be disposed of as hazardous waste


Are you interested in the product?
Contact us